• Jobs & Careers/
  • Contact/
  • News & Blog
Open Search...
Logo
Jobs & CareersContactNews & Blog
Close Icon
Our Solutions
Systems and Brands
Case Studies
Magazine
Service Portal
ACADEMY
About us
Logo
Our Solutions
Systems and Brands
Case Studies
Magazine
Service Portal
ACADEMY
About us
Home

Universal Adhesive

The Universal Adhesive is a product of the ARBOBOND Pro® category and is used as a solvent-free, one-part moisture-curing adhesive based on modified polymer technology, which when cured gives a strong, flexible bond that is over-paintable. It is the ultimate all-weather bond for modern construction.

Unique properties of Universal Adhesive

Designed for maximum versatility, this professional-grade modified polymer adhesive is ideal for both interior and exterior bonding. It provides a high-strength, permanent solution for securing a wide variety of construction materials, including metal, brick, block and most common substrates.

  • Superior versatility – one solution for metal, brick, block and most common construction substrates

  • All-weather performance – bonds effectively to both dry and damp surfaces

  • Service temperature range of -40 °C to +150 °C

  • Extreme durability with a service life of 20 years+

  • Paintable surface once cured for a seamless finish

  • Advanced UV resistance – resists yellowing and degradation from sunlight

  • Flexible bond accommodating elongation of ±35 %

  • High anti-pick quality for secure units and areas

  • Solvent-free, one-part moisture-curing formulation

Technical Specifications & Downloads

Description/StandardPerformance
ColourWhite
Skin Time at 20°C / 65% RH20 minutes
Application Temperature+5°C to +40°C
Service Temperature-40°C to +150°C
Typical Shore A Hardness50
Cure Rate at 20°C / 65% RH 1-2 mm / 24 hours
Chemical ResistanceResistant to most dilute acids and alkalis. Organic solvents may cause the sealant to swell and lose adhesion
UV ResistanceVery good
Service Life 20 years+

* Through cure rate will be retarded where passage of moisture to the centre of a large amount of product occurs.

Associated Products

ARBO Membrane Adhesive

One-part moisture-curing solvent-free modified polymer adhesive for bonding EPDM to aluminium, galvanised, PVCu and mineral board substrates.

ARBO® Primer 2650

A one-part solvent-based polyacrylate/silane blend primer for porous surfaces, for use with the ARBOSil and ARBOMeric ranges and ARBO® EPDM Membrane System.

ARBO® Cleaner 16

Alcohol-based cleaner suitable for cleaning and degreasing sensitive surfaces prior to sealant application.

ARBO® Cleaner 17

Xylene-based cleaner for the effective cleaning and degreasing of construction substrates prior to sealant application.

Frequently Asked Questions

1

Why choose ARBOBOND Pro® Universal Adhesive?
ARBOBOND Pro® Universal Adhesive is a solvent-free, one-part moisture-curing modified polymer adhesive that provides a strong, flexible, over-paintable bond. It offers superior versatility across metal, brick, block and most common construction substrates, all-weather performance on dry or damp surfaces, a service temperature range of -40 °C to +150 °C and a service life of 20 years+.

2

What are the key benefits of ARBOBOND Pro® Universal Adhesive?
Key benefits include: solvent-free, one-part moisture-curing formulation; bonds to metal, brick, block and most common substrates; service temperature range of -40 °C to +150 °C; service life of 20 years+; paintable surface once cured; very good UV resistance; flexible bond accommodating elongation of ±35 % and high anti-pick quality.

3

What substrates are ARBOBOND Pro® adhesives suitable for?
ARBOBOND Pro® adhesives are formulated for use with EPDM and a wide range of common construction substrates including aluminium (polyester powder coated and other finishes), galvanised finishes, PVCu, mineral boards, concrete, masonry and timber. ARBO® AFS Primer is recommended for porous substrates. Contact ARBO® Technical Services for advice on untested substrates.

4

What temperature range can ARBOBOND Pro® adhesives be applied in?
ARBOBOND Pro® adhesives must not be applied at temperatures below +5°C or where relative humidity is below 40%. The upper application temperature limit varies by product — refer to the individual product TDS. Service temperatures typically range from -40°C to +120°C or higher.

5

How long is the service life of ARBOBOND Pro® adhesives?
ARBOBOND Pro® adhesives are designed for long-term performance, with a service life of 20 years or more under normal conditions. Storage life is up to 12 months in original unopened packaging stored in a cool, dry place out of direct sunlight.

6

What technical support is available for specifying ARBOBOND Pro®?
ARBO® Technical Services provides full guidance on product selection, surface preparation, primer requirements and application methods for ARBOBOND Pro® adhesives. NBS specification support and direct contact with technical advisors are available for project-specific enquiries.

Explore the ARBO® Product Family

Sealants

Sealants for reliable movement joint, perimeter and weatherproof sealing in a wide range of applications.

Weather Protection

Effective weather sealing solutions for interface applications, penetration sealing and structural joints.

Adhesives

Bonding solutions for secure and durable adhesion across façade and construction substrates.

Accessories

Caulking Guns, Nozzles, Knives, Scrapers, G Clamps etc.

Find your contacts

Regardless of whether you are an architect and planner, property developer, industry specialist, distributor, applicator or specifier – if you have any questions about our products, services or specific construction projects, please feel free to contact the CARLISLE® contact person in your area with your technical questions. Our experts will be happy to advise you.

Here's how to do it: Simply enter your postcode in the search field of the map

CCM Logo
CARLISLE® Construction Materials Ltd.

Lancaster House, Millenium Business Park
Mansfield, Notts NG19 7DW
T +44 1623 627 285
E info.uk@ccm-europe.com

  • LinkedIn
  • Facebook
  • YouTube
© 2026 CCM Europe
Our Solutions
  • EPDM Membranes
  • TPO/FPO Membranes
  • Liquid Waterproofing
  • Facade Systems
  • Sealing & Bonding
Products
  • RESITRIX®
  • HERTALAN®
  • SURE WELD®
  • ALUTRIX®
  • ARBOFLEX®
  • ARBO®
Service
  • Downloads
  • Technical videos
  • Search
  • Contact
  • Stockists
About CARLISLE® CM Europe
  • About Us
  • Contact
  • Jobs & Careers
  • CARLISLE USA
Legal
  • Data Protection
  • Terms & Conditions
Image

Main Applications

Universal Adhesive is used for high-strength, permanent bonding across a wide variety of construction materials in both interior and exterior applications.

Metal Bonding

Provides a high-strength, flexible bond for securing metal substrates in interior and exterior construction applications.

Brick & Block

Permanent, all-weather adhesion for brick, block and most common construction substrates.

Interior & Exterior Construction

Designed for maximum versatility across interior and exterior bonding tasks on modern construction projects.

All-Weather Bonding

Bonds effectively to both dry and damp surfaces, with a service temperature range of -40 °C to +150 °C.

Membrane Adhesive - ARBOBond PRO®
Read more
ARBO® Primer 2650
Read more
ARBO Cleaner 16
Read more
ARBO Cleaner 17
Read more
ARBOSEAL Pro Range
Discover ARBOSEAL Pro®
Accessories
Discover ARBOPROTECT Pro®
Arbobond Pro
Discover ARBOBOND Pro®
Accessories
Discover Accessories

CARLISLE® ACADEMY

Make your knowledge watertight! With practical training for installers, architects, and planners.

  • Installers: Your path to becoming a qualified specialist installer 

  • Architects & Planners: Advanced training courses with CPD (Continuing Professional Development) credits 

  • Webinars: CARLISLE® Knowledge Hub: Expert knowledge for your building projects

All dates and registration
we-are-carlisle
Need further help?
Are you looking for an expert advise and/or more information?
Get in touch
We are here to help
Are you looking for an expert advise and/or more information?