ARBO® Lead Seal S
ARBO® Lead Sealant
ARBO® Lead Seal S Silicone Lead Sealant is a solvent free, low-modulus, neutral-cure silicone that comes in a convenient 310ml cartridge.
The solvent-free product prevents corrosive attacks on lead sheeting, guttering, or other sensitive metals.
The Lead Contractors Association approves Arbo Lead Seal S.
Benefits and Applications of ARBO® Lead Seal S
If you're looking for a reliable lead sealant for use in construction or roofing, ARBO® Lead Seal S is a high-performance, solvent-free lead seal designed to deliver a long-lasting, watertight finish. Unlike traditional mortar, this advanced lead sealant offers exceptional flexibility and durability, making it ideal for sealing joints in lead flashings, masonry, and brickwork.
Key Benefits of Using ARBO® Lead Sealant
Solvent-Free & Neutral Curing: It is completely solvent-free and uses neutral curing technology to prevent corrosion of lead and other metals. It's safe for use on sensitive substrates and won't damage adjacent materials.
Highly Flexible & Crack-Resistant: Unlike rigid mortars, ARBO® Lead Seal S maintains its elasticity over time. It won't dry out, shrink, or become brittle, even under harsh weather conditions.
Long-Term Durability: This lead sealant withstands temperatures from -40°C to +150°C and has excellent UV resistance, making it ideal for internal and external applications.
Easy to Apply: Supplied in 310ml cartridges, it can be applied using a standard caulking gun, making it easy for contractors to use on-site.
Chemical & Weather Resistance This robust lead sealant resists most dilute acids and alkalis, providing dependable performance in demanding environments.
Where to Use a Lead Seal
ARBO® Lead Seal S is designed for a wide range of professional applications, including:
Sealing and jointing lead sheeting and flashings: Ideal for roofing contractors who need a flexible seal for lead flashings without using traditional mortar.
Pointing into brickwork, masonry, and stonework: A perfect solution for durable joint sealing in building façades and structures.
General building and repair work: Suitable for new installations and repair projects involving lead, stone, or brick interfaces.
NB: If using against natural stone or other sensitive substrates please contact Adshead Ratcliffe Technical Services Department for advice.
Application Instructions
Joint Preparation
The joint surfaces must be clean, dry and free from all contamination. The surfaces should be degreased using the appropriate ARBO Cleaner. Primers may be required on some substrates. It is recommended that Adshead Ratcliffe Technical Services should be consulted, and advice obtained regarding the choice of primer for specific purposes.
Joint Backing
Where applicable, appropriate joint filler e.g. closed cell polyethylene foam, should be used to provide the correct joint depth
Technical Specifications
| Technical Data | |
|---|---|
| Joint Size Suitability | Joint Width - Minimum 6mm Maximum 25mm Joint Depth - Minimum 6mm on non-porous substrates Maximum 15mm Width: Depth ratio (within above min/max restrictions) 2:1 butt joints 1:1 lap joints |
| Skin Time at 20º C/65 % RH: | 10 minutes |
| Application temperature: | + 5˚C to + 40˚C |
| Service temperature: | - 40°C to + 150°C |
| Typical Shore A Hardness: | 30 |
| Cure Rate: | 2mm/24 hours |
| Chemical Resistance: | Resistant to most dilute acids and alkalis. Organic solvents may cause the sealant to swell and lose adhesion. |
| UV Resistance: | Very good |
| Service Life: | 20 years+ |
| Colour: | Grey |
:format(webp):quality(75)?updated_at=2023-05-17T06:45:31.815Z)
?updated_at=2023-05-17T06:45:31.815Z)
:quality(75))
:quality(75))
:quality(75))
:quality(75))