CCM Logo

Contact Adhesive HERTALAN® KS137

HERTALAN® EPDM KS137 is a ready-for-use contact adhesive. It adheres HERTALAN® EPDM membranes, both vertically and horizontally, onto surfaces such as wood, bitumen, masonry material, lead and suitable faced rigid thermal insulation boards.

HERTALAN® KS 137: Properties and installation

HERTALAN® KS137 creates a strong adhesion between two layers of HERTALAN® EPDM sheets or when the membrane to a suitable base. KS137 should be applied to both sides. The adhesive bond is elastic and waterproof, and when it has completely dried, it is resistant to temperatures from -40°C up to 80°C.

HERTALAN® KS 137 is ready to use and must not be diluted or mixed with other materials. The application must take place in dry weather from + 5 °C. The surface must be dry, free of grease and clean.

  • Ready-to-use contact adhesive

  • Can be used on wood, bitumen and laminated insulation boards 

  • The adhesive bond is elastic and waterproof

  • Can be used with KS 96 Adhesive Sealant

  • Available in cans of 5.3 and 0.9kg

  • Coverage approx. 10 m² for 5.3kg

  • Coverage approx. 1.9 m² for 0.9kg

Technical Data

Properties Value
Type of productAdhesive based on synthetic rubber and synthetic resins, dissolved in inflammable organic solvents.
ColourBlack
Viscosity (20 °C)3.500 ± 500 mPas
Density (20 °C)860 ± 10 kg/m³
Dry solids 45 ± 2 %
Dry film Highly elastic
Shelf life 12 months, provided that the adhesive is kept in the original unopened can.
Packaging 0.9kg and 5.3 kg

Discover HERTALAN® range of accessories here

Hertalan® corner form parts
HERTALAN® Flashing
Hertalan® welding cord
Hertalan® welding cord
Hertalan® seam band
Hertalan® seam band
Hertalan® pipe cuffs
Hertalan® pipe cuffs
HERTALAN® Flash Weld Produced parts
HERTALAN® Flash Weld Produced parts